CRL Curved Right Hand Sidelite Transom Patch With Support Fin Bracket and 1NT300 Insert *DISCONTINUED*

• Works With 2-11/16" (68 mm) Pivot Setback Door Patch Fittings
• Left and Right Handed
• For 3/8" or 1/2" (10 or 12 mm) Glass
• Use Monolithic Tempered Glass

The CRL Curved Left Hand Sidelite Mounted Transom Patch with Support Fin Bracket is used to support a transom from a sidelite glass panel. It comes with a INT300 Insert for mounting a door with a CRL PH20A or PH21A Top Door Patch Fitting. For single doors, the insert can be removed on the non-hinged side allowing for a double swinging door. A INT306 Transom Patch Door Stop Insert can be used to create a one way door. Also, a INT305 Transom Patch Keeper Insert can be installed for use with an AMR205 Lock when used for a top of the door installation. The support fin glass should be sized in accordance with approved design criteria (refer to GANA or Manufacturers Manual) and secured to the ceiling with a Ceiling Mounted Support Fin Bracket.

GLASS FABRICATION REQUIRED:
Five 3/4" (19 mm) Diameter
Holes and Two Corner Notches

COMES WITH:
Template and Instructions