CRL Oil Dynamic Full Back Plate Wall-to-Glass Hinge - NHO

• For Self-Closing Glass Doors from 5/16" to 9/16" (8 to 13.52 mm) Thick
• Recommended for Use as Interior Entry Doors to Bathroom/Shower Area (Not for Shower Doors)
• Aluminum Body in Your Choice of Three Finishes: Brite Chrome, Brushed Satin, and Satin Anodized
• Adjustable Closing Speed

This CRL Full Back Plate Wall Mount Hinge swings in and out a full 90º, with stop at 0º. Closing speed can be adjusted. For doors up to 39" (1 m) wide. Maximum weight per two hinges is 220 lbs. (100 kg).

The Vernon Hinge represents the evolution and the synthesis between automatic mechanical hinges and hydraulic door closers. Designed for use on interior doors (not for Shower Doors) leading into the bathroom area, Vernon allows you to design a self-closing door without the need of a floor-mounted or overhead closing device. This gives you the advantage of being able to install an 'all-glass' door in an existing opening without the need for extensive retrofitting of hardware into the floor or overhead.

Properly mounted, two Vernon Hinges will support a 5/16" to 9/16" (8 to 13.52 mm) thick glass door up to 39" (1 m) in width and weighing up to 220 lbs. (100 kg). (Do not use more than two hinges.) A control valve lets you adjust the hinge to the desired closing speed. The Vernon Hinge has an internal stop on the valve adjustment screw stopping you from going too far, so you can open completely (4-5 turns) until you reach the speed required. The Vernon works properly between 5° to 104° degrees without problems. The viscosity of the oil could change, hence you may need to adjust the speed to compensate. And Vernon is ambidextrous, giving you even more design freedom.

The Vernon Hinge features an aluminum body in distinct configurations for Wall Mount and Glass-to-Glass applications. Vernon has been subject to strict testing (over 1 million cycles), assuring long lasting service.SPECIFICATIONS:

• Glass Thickness Range: 5/16" to 9/16" (8 to 13.52 mm)
  
• Construction: Aluminum
  
• Hinge Swings: 90º Inwards and Outwards (Except 31M8060 Model, Which Only Swings One Way)
  
• Closing Type: Automatic Closing From 0º to 80º
  
• Cut-Out Required
  
  
• Includes: Snap-In Molded Gaskets for 5/16" to 9/16" (8 to 13.52 mm) Glass; Maximum Capacities Using Two Hinges: Door Width: 39" (1 m); Door Weight: 220 lbs. (100 kg)
  
  NOTE: Do not use more than two hinges on one door.